Theoretical study of the thermal interconversion mechanism between the norbornadiene and quadricyclane radical cations

Geometry optimizations at the UHF/6-31G^* and UMP2/6-31G^* levels of theory were performed to find the transition state in the interconversion between norbornadiene (N) and quadricyclane (Q) radical cations. Two transition structures, TS^+·₁ and TS^+·₂, were obtained which have C₁ and C₂ symmetry, respectively. Vibrational analysis at the UHF and UMP2 levels of theory and IRC calculation showed that TS^+·₁ is the true transition state connecting N^+· and Q^+·, while TS^+·₂ is a second order saddle point.     

Stereoselective synthesis of tetrasubstituted (Z)-alkenes from aryl alkyl ketones utilizing the Horner-Wadsworth-Emmons reaction

Tetrasubstituted (Z)-alkenes were readily prepared through the Horner-Wadsworth-Emmons reactions of methyl 2-[bis(2,2,2-trifluoroethyl)phosphono]propionate with aryl alkyl ketones by employing Sn(OSO(2)CF(3))(2) and N-ethylpiperidine.     

Stimulatory effect of red light on starch accumulation in a marine green alga,chlamydomonas sp. strain MGA161

A marine green alga,Chlamydomonas sp. strain MGA161 was cultivated under illumination of red and white lights. The growth rate under red light illumination was almost the same as that in the basic conditions under white light illumination, but red light-grown cells accumulated almost twice as much starch as white light-grown cells. Although there was a slight decrease in carbonic anhydrase activity, red light-illuminated cells had almost 2.3 times the fructose-l,6-diphos-phatase activity of white light-illuminated cells. Red light might stimulate starch accumulation by increasing the amounts of enzymes related to carbon fixation through the phytochrome system. Cells grown under red light degraded 1.6 times as much starch and produced 1.7 times as much hydrogen and 1.6 times as much ethanol compared with cells grown under white light during 12 h of dark anaerobic fermentation.     

Inclusion of cut and as-grown single-walled carbon nanotubes in the helical superstructure of schizophyllan and curdlan (beta-1,3-glucans)

We have found that single-chain schizophyllan and curdlan (s-SPG and s-curdlan, respectively) can dissolve as-grown and cut single-walled carbon nanotubes (ag-SWNTs and c-SWNTs, respectively) in aqueous solution. The vis-NIR spectra of the composites suggest that c-SWNTs are dissolved as a bundle, whereas ag-SWNTs exist as one or only a few pieces in the tubular hollow constructed by the helical structure inherent to these beta-1,3-glucans. EDX and CLSM measurements and TEM observation established that the distribution map of these polysaccharides overlaps well with the image of SWNTs, indicating that these two components form a composite. Very interestingly, when c-SWNTs were dissolved with the aid of s-SPG or s-curdlan in water, a clear periodical structure with inclined stripes, as detected by AFM, appeared on the fibrous composite surface. Because this periodical structure has never been recognized for the composites with other water-soluble polymers, one can regard that s-SPG or s-curdlan wraps c-SWNTs constructing a helically twined structure. High-resolution TEM observation of an ag-SWNTs/s-SPG composite gave a clearer image in that two s-SPG chains twine one ag-SWNT and the helical motif is right-handed. When this sample was subjected to the AFM measurement, the composite showed the 2-3 nm height. This height implies that one piece of ag-SWNT is included in the s-SPGs helical structure. As a summary, it has been established that beta-1,3-glucans such as s-SPG and s-curdlan not only dissolve SWNTs but also create a novel superstructure on the surface.     

Ion-exchange selectivity and chromatographic separation of trivalent metals on titanium antimonate

Summary The ion exchange selectivity of trivalent metal ions has been determined on titanium antimonate cation exchanger prepared by coprecipitation of antimony to titanium at different mole ratios. The selectivity sequence Al³⁺<Cr³⁺<Ga³⁺<In³⁺<Fe³⁺ was found for trivalent metal ions at an initial concentration of 10^–4 mol dm^–3 in nitric acid media. A high separation factor ^Ga/Al = Kd^Ga/Kd^Al, 4.8×10³, was observed for the Ga³⁺–Al³⁺ pair on titanium antimonate with an antimony to titanium ratio of 0.34. The effective separation of Ga³⁺ and In³⁺ from Al³⁺ was achieved using a 3 cm×0.5 cm i.d. column containing titanium antimonate with an antimony to titanium ratio of 0.34.     

Groove-spanning behavior of lipid membranes on microfabricated silicon substrates

We report on a spreading behavior of phospholipid membranes that arise from a lump of phospholipid (a lipid source) on topographically patterned substrates immersed in an aqueous solution. Microgrooves with well-defined shapes were prepared on Si111 surfaces by anisotropic etching in an alkaline solution. A spreading front that consists of membrane lobes and a single lipid bilayer was observed on the patterned silicon substrates by utilizing fluorescence interference contrast (FLIC) microscopy. FLIC images indicate that the membrane lobes span the microgrooves, while the underlying single lipid bilayer spread along the surface of the microgrooves. In fact, fluorescent polystyrene nanoparticles could be encapsulated in the microgrooves that were completely covered with the membrane lobes. The groove-spanning behavior of membrane lobes is discussed in terms of a balance between adhesion and bending energies of lipid bilayers.     

Improvement of the Derjaguin-Broekhoff-de Boer theory for the capillary condensation/evaporation of nitrogen in spherical cavities and its application for the pore size analysis of silicas with ordered cagelike mesopores

In a previous work, we proposed an improvement of the Derjaguin-Broekhoff-de Boer (DBdB) theory for capillary condensation/evaporation in open-ended cylindrical mesopores. In this paper, we report a further extension of this approach to the capillary condensation/evaporation of nitrogen in siliceous spherical cavities. The main idea of this improvement is to employ the Gibbs-Tolman-Koenig-Buff equation to predict the variation of the surface tension in spherical mesopores. In addition, the statistical film thickness (the so-called t-curve), which is evaluated accurately on the basis of adsorption isotherms measured for MCM-41 materials, is used instead of the originally proposed t-curve to take into account the excess chemical potential due to the surface forces. It is shown that the aforementioned modifications of the original DBdB theory that was refined by Ravikovitch and Neimark have significant implications for the pore size analysis of cagelike mesoporous silicas. To verify the proposed improvement of the DBdB pore size analysis (IDBdB), two series of FDU-1 samples, which are well-defined cagelike mesoporous materials (composed of siliceous spherical cavities interconnected by short necks), were used for the evaluation of the pore size distributions (PSDs). The correlation between the spinodal condensation point in the spherical pores predicted by the nonlocal density functional theory (NDFT) developed by Ravikovitch and Neimark and that predicted by the IDBdB theory is very good in the whole range of mesopores. This feature is mirrored to the realistic PSD characterized by the bimodal structure of pores computed from the IDBdB theory. As in the case of open-ended cylindrical pores, the improvement of the classical DBdB theory preserves its simplicity and simultaneously ensures a significant improvement of the pore size analysis, which is confirmed by the independent estimation of the average pore size by the NDFT and the powder X-ray diffraction method.     

Synthesis of all of the four possible stereoisomers of pestalotin,a gibberellin synergist isolated from pestalotia cryptomeriaecola sawada

(-)-Pestalotin [(6S, l'S)-6-(1'-hydroxypentyl)-4-methoxy-5,6-d dihydro-2-pyrone 1a]and its three other stereoisomers were synthesized either by utilizing the Sharpless asymmetric epoxidation as the keystep or by derivation from D-(+)-glyceraldehyde acetonide.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.